New Delhi
08048033256
+919910672821

Underground to Overhead Tank Automation in New Delhi

What Is Underground to Overhead Tank Automation?


Underground to overhead tank automation is a smart water-management system that automatically transfers water from an underground tank, borewell or other water source to an overhead tank.

In a conventional setup, someone has to check the overhead tank, start the motor, monitor the filling process and switch the motor off when the tank is full.

An automated system performs these tasks using water-level sensors and a controller.

AquaBrim's Macro is specifically designed for borewell and submersible pump applications where water needs to be pumped from an underground source to an overhead tank. It uses RF-based wireless sensors to monitor both the underground source and overhead tank.



How Does Underground to Overhead Tank Automation Work?

The basic water flow is:


Underground Tank / Borewell → Pump → Overhead Tank

The automation process works through several stages:


1. Monitoring the Underground Source

A sensor monitors the available water in the underground tank or borewell.


2. Monitoring the Overhead Tank

A second wireless sensor monitors the water level in the overhead tank.


3. Detecting a Low Tank Level

When the overhead tank reaches the configured low-level threshold, the controller determines that more water is required.


4. Starting the Motor Automatically

AquaBrim Macro automatically starts the connected motor when the overhead tank falls below its configured threshold. The current AquaBrim product specification lists below 50% as the automatic motor-start level.


5. Filling the Overhead Tank

The pump transfers water from the underground source to the overhead tank.


6. Automatically Stopping the Motor

Once the overhead tank reaches the required level, the controller switches the motor OFF.

This eliminates the need for someone to stand near the pump or repeatedly check the rooftop tank.



Why Automate Underground-to-Overhead Water Transfer?

Manual pumping can create several common problems:

  • Forgetting to start the motor
  • Forgetting to switch the motor OFF
  • Overhead tank overflow
  • Motor dry running
  • Unnecessary electricity consumption
  • Frequent rooftop tank inspections
  • Difficulty monitoring underground water availability
  • Manual intervention during daily water management

AquaBrim's water automation systems are designed to reduce this manual involvement by continuously monitoring water conditions and automatically managing motor operation.



Automatic Motor Start and Stop

Automatic motor control is one of the main advantages of underground-to-overhead tank automation.

The controller can:


Low overhead tank → Motor ON → Tank filling → Tank full → Motor OFF

AquaBrim Macro monitors both the underground source and overhead tank and automatically controls the pump according to the configured water-level conditions.

This is especially useful for homes and buildings where the motor and overhead tank are located far apart.



Underground Tank Water Level Monitoring

Monitoring only the overhead tank is not always enough.

Imagine that the overhead tank is almost empty and the automation system starts the pump. If the underground tank has insufficient water, the pump could continue running without an adequate water source.

An underground-to-overhead automation system therefore needs to consider both sides of the pumping process:

Source water availability + Destination tank level

AquaBrim Macro monitors the underground source and overhead tank using wireless sensors.



Dry-Run Protection for the Pump

Dry running happens when a pump operates without sufficient water at the source.

This is particularly important with:

  • Borewell pumps
  • Submersible pumps
  • Underground storage tanks
  • Areas with fluctuating water availability

AquaBrim Macro's current specifications state that it stops the motor if the underground level falls below 20% or if water flow is interrupted for more than 2 minutes. The system can restart when the underground level recovers to 30% or above, according to its configured operating logic.

This makes source-level monitoring an important part of underground-to-overhead tank automation.



Preventing Overhead Tank Overflow

Another major advantage is automatic full-tank shut-off.

When the overhead tank reaches its required level, the controller stops the pump.

This helps reduce:

  • Water wastage
  • Unnecessary pumping
  • Terrace overflow
  • Manual supervision

AquaBrim describes Macro as providing automatic full-tank shut-off and overflow prevention.



Wireless Underground to Overhead Tank Automation

One of the challenges with traditional tank automation is running cables between the tank and motor controller.

AquaBrim Macro uses RF wireless technology, allowing the underground and overhead tank sensors to communicate with the controller without conventional tank-to-controller communication wiring.

This can be useful in:

  • Existing houses
  • Apartments
  • Villas
  • Commercial buildings
  • Properties where cable installation is difficult
  • Buildings where the pump and tanks are separated by floors

AquaBrim also highlights wireless installation as a way to avoid wall cutting and extensive rewiring.



Underground to Overhead Tank Automation for Borewell Systems

Borewell water is commonly pumped into an overhead tank through an underground storage arrangement or directly through a submersible pump.

A typical configuration is:

Borewell → Underground Storage → Submersible Pump → Overhead Tank

The controller monitors the water levels and manages the pumping cycle.

AquaBrim Macro is designed specifically for borewell and submersible pump automation and can work with an underground tank or directly with a borewell setup, depending on the installation.



Underground to Overhead Tank Automation for Homes

For an independent house, automation can remove a repetitive daily task.

Instead of:

Check Tank → Start Motor → Wait → Check Tank Again → Stop Motor

the automated process becomes:

Tank Low → Automatic Motor ON → Tank Fills → Automatic Motor OFF

This is particularly useful when residents are:

  • At work
  • Sleeping
  • Travelling
  • Busy with daily activities
  • Unable to regularly inspect rooftop tanks

AquaBrim identifies homes, apartments and commercial buildings as suitable applications for Macro.



Underground to Overhead Tank Automation for Apartments

Apartment buildings can have more complicated water systems involving multiple underground and overhead tanks.

In such situations, a controller designed for a larger installation may be required.

AquaBrim Matrix is designed for multi-tank installations and can control up to 13 overhead tanks and 1 underground tank, with support for up to two motors according to AquaBrim's current product information.

Matrix also supports MODBUS communication for Building Management System integration.



Key Benefits of Underground to Overhead Tank Automation


Automatic Motor Operation

The system automatically starts and stops the motor according to water-level conditions.


Water Overflow Prevention

The pump can stop automatically when the overhead tank reaches its required level.


Dry-Run Protection

Source-level monitoring helps prevent the motor from continuing to run when sufficient water is unavailable.


Wireless Communication

RF wireless sensors reduce the need for long communication cables.


Reduced Manual Intervention

Users do not need to repeatedly check the tank and operate the motor.


Better Water Management

The system coordinates source availability and destination tank requirements.


Suitable for Borewell Systems

A controller such as Macro is specifically designed for borewell and submersible pump applications.



Important Features to Consider

Before selecting an underground-to-overhead tank automation system, consider:


Water Source

Is your water coming from a borewell, underground tank or another source?


Pump Type

Check compatibility with your submersible or other pump configuration.


Number of Tanks

A single-house installation has different requirements from an apartment with multiple tanks.


Dry-Run Protection

For borewell and submersible systems, source-level protection should be an important consideration.


Wireless Technology

Wireless communication can simplify installation when tanks and motors are located on different floors.


Automatic Full-Tank Shut-Off

The controller should stop the motor when the overhead tank reaches the required level.


Manual Control

A manual trigger can be useful for testing or special operating conditions. AquaBrim Macro includes a manual trigger function.



Why AquaBrim Macro for Underground to Overhead Tank Automation?

AquaBrim Macro combines several functions into one water-automation solution:

  • Underground/source water monitoring
  • Overhead tank monitoring
  • Automatic motor ON/OFF
  • Dry-run protection
  • Overflow prevention
  • RF wireless communication
  • Digital display
  • LED status indicators
  • Multi-tank support
  • Manual trigger

AquaBrim states that Macro is designed for homes, apartments and commercial buildings using borewell or submersible pumps.



Frequently Asked Questions


1. What is underground to overhead tank automation?

It is an automated system that monitors an underground water source and overhead tank and automatically operates a pump to transfer water between them.


2. How does underground to overhead tank automation work?

Sensors monitor the underground source and overhead tank. When the overhead tank reaches its configured low level and sufficient source water is available, the controller starts the pump. The pump stops when the overhead tank reaches the required level.


3. Can AquaBrim Macro work with a borewell?

Yes. Macro is specifically designed for borewell and submersible pump automation. It can work with an underground tank or directly with a borewell, depending on the installation.


4. Does Macro automatically start the motor?

Yes. AquaBrim states that Macro automatically starts the motor when the overhead tank falls below its configured threshold, currently specified as below 50%.


5. Does the system automatically stop the motor?

Yes. Macro automatically stops the motor when the overhead tank reaches the required full level.


6. Does underground-to-overhead automation provide dry-run protection?

Yes, when the selected controller includes dry-run protection. AquaBrim Macro monitors the underground source and can stop the motor if the source level becomes too low or water flow is interrupted beyond the specified period.


7. Does Macro require cables between the tanks and controller?

No. Macro uses RF wireless technology for communication between the sensors and controller, so conventional tank-to-controller communication wiring is not required.


8. Can the system prevent overhead tank overflow?

Yes. Macro automatically switches the motor OFF when the overhead tank reaches the required level, helping prevent overflow.


9. Can one controller monitor multiple tanks?

Yes, depending on the configuration. AquaBrim Macro supports additional wireless sensors for multiple connected tanks. For larger multi-tank installations, AquaBrim Matrix is designed to manage up to 13 overhead tanks and one underground tank.


10. Is underground-to-overhead tank automation suitable for commercial buildings?

Yes. AquaBrim Macro is designed for residential, apartment and commercial applications, while Matrix is intended for larger multi-tank buildings and institutional installations.

 2026-09-12T09:02:38

Keywords